希望适配亮钻lz-k3568的主板

[zzhccv1234]

dts
https://github.com/zzhccv1234/build-linux-cm9vdA/blob/master/boot/dts/rockchip/vendor/rk3568-lz-k3568.dts

目前用这个源码编译的6.1.99内核的固件可以正常启动，希望O大给适配

配置RK3568
双千兆网口
ram:8G
emmc:128G

[ophub]

根据你提供的源码，放在bsp里是无法编译的。我使用了你这个仓库里的主线dts可以编译。

使用的是主线内核： https://github.com/zzhccv1234/build-linux-cm9vdA/blob/master/boot/dts/rockchip/mainline/rk3568-lz-k3568.dts

使用的是这个u-boot源码： https://github.com/zzhccv1234/build-linux-cm9vdA/blob/master/u-boot/rockchip/u-boot-2025.01/k3568-rk3568_defconfig

u-boot和内核都在本地顺利编译完了。内核我在 6.1.y, 6.6.y, 6.12.y 这3个内核里都测试了可以正常编译，已经提交到f大的内核仓库了。
在armbian仓库我已经添加好了编译选项，现在正在编译内核，等半小时后内核编译好了就可以打包了。

正在编译的内核： https://github.com/ophub/kernel/actions
6.12.y: unifreq/linux-6.12.y@99f7166
6.6.y: unifreq/linux-6.6.y@d3dde59
6.1.y: unifreq/linux-6.1.y@2e06131
u-boot: ophub/u-boot@766edd1

[ophub]

https://github.com/ophub/amlogic-s9xxx-armbian/releases

你下载测试下，CTRL + F 搜： lz-k3568

[zzhccv1234]

https://paste.armbian.com/nabofaveza.yaml

点击这里展开/收起日志

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.12.63-ophub (root@b8d61671dd54) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 15.2.Rel1 (Build arm-15.86)) 15.2.1 20251203, GNU ld (Arm GNU Toolchain 15.2.Rel1 (Build arm-15.86)) 2.45.1.20251203) #1 SMP PREEMPT_DYNAMIC Wed Jan  7 06:52:01 UTC 2026
[    0.000000] Machine model: LZ-K3568
[    0.000000] efi: UEFI not found.
[    0.000000] OF: reserved mem: 0x000000000010f000..0x000000000010f0ff (0 KiB) nomap non-reusable shmem@10f000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 256 MiB at 0x00000000dc000000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] percpu: Embedded 31 pages/cpu s87896 r8192 d30888 u126976
[    0.000000] pcpu-alloc: s87896 r8192 d30888 u126976 alloc=31*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: root=UUID=c5d5905c-3fcf-4a75-8e8a-bb283edcb8b6 rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=9b1455a5-c584-4a3e-9b05-9cc06fa88762 usb-storage.quirks= rw rootwait net.ifnames=0 max_loop=128 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=9b1455a5-c584-4a3e-9b05-9cc06fa88762 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2031104
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000d8000000-0x00000000dc000000] (64MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Dynamic Preempt: voluntary
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: enabling workaround for GICv3: non-coherent attribute
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 320 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [296:319]
[    0.000000] GICv3: Using MBI frame 0x00000000fd410000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    0.000000] ITS [mem 0xfd440000-0xfd45ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3568002
[    0.000000] GIC: enabling workaround for ITS: non-coherent attribute
[    0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @410000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @420000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x0000000000430000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000440000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002645] Console: colour dummy device 80x25
[    0.002711] printk: legacy console [tty1] enabled
[    0.002846] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.002868] pid_max: default: 32768 minimum: 301
[    0.005924] LSM: initializing lsm=capability,selinux
[    0.008369] SELinux:  Initializing.
[    0.014922] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.014978] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.021903] rcu: Hierarchical SRCU implementation.
[    0.021927] rcu: 	Max phase no-delay instances is 1000.
[    0.024499] EFI services will not be available.
[    0.025097] smp: Bringing up secondary CPUs ...
[    0.026042] Detected VIPT I-cache on CPU1
[    0.026146] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    0.026172] GICv3: CPU1: using allocated LPI pending table @0x0000000000450000
[    0.026236] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.027271] Detected VIPT I-cache on CPU2
[    0.027365] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    0.027388] GICv3: CPU2: using allocated LPI pending table @0x0000000000460000
[    0.027440] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.028483] Detected VIPT I-cache on CPU3
[    0.028575] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    0.028597] GICv3: CPU3: using allocated LPI pending table @0x0000000000470000
[    0.028648] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.028792] smp: Brought up 1 node, 4 CPUs
[    0.028822] SMP: Total of 4 processors activated.
[    0.028829] CPU: All CPU(s) started at EL2
[    0.028838] CPU features: detected: 32-bit EL0 Support
[    0.028844] CPU features: detected: 32-bit EL1 Support
[    0.028853] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.028860] CPU features: detected: Common not Private translations
[    0.028867] CPU features: detected: CRC32 instructions
[    0.028874] CPU features: detected: Data cache clean to Point of Persistence
[    0.028888] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.028896] CPU features: detected: LSE atomic instructions
[    0.028903] CPU features: detected: Privileged Access Never
[    0.028909] CPU features: detected: RAS Extension Support
[    0.028919] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.028991] alternatives: applying system-wide alternatives
[    0.034281] Memory: 7595572K/8124416K available (19840K kernel code, 4060K rwdata, 14112K rodata, 2560K init, 685K bss, 261152K reserved, 262144K cma-reserved)
[    0.037699] devtmpfs: initialized
[    0.066066] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.066109] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.074993] 22400 pages in range for non-PLT usage
[    0.075021] 513920 pages in range for PLT usage
[    0.076021] prandom: seed boundary self test passed
[    0.078541] prandom: 100 self tests passed
[    0.078615] pinctrl core: initialized pinctrl subsystem
[    0.079811] DMI not present or invalid.
[    0.083521] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.085019] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.085570] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.086042] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.086132] audit: initializing netlink subsys (disabled)
[    0.086457] audit: type=2000 audit(0.079:1): state=initialized audit_enabled=0 res=1
[    0.090166] thermal_sys: Registered thermal governor 'step_wise'
[    0.090282] cpuidle: using governor ladder
[    0.090687] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.090866] ASID allocator initialised with 65536 entries
[    0.091133] Serial: AMBA PL011 UART driver
[    0.110156] /vop@fe040000: Fixed dependency cycle(s) with /hdmi@fe0a0000
[    0.110277] /hdmi@fe0a0000: Fixed dependency cycle(s) with /vop@fe040000
[    0.137168] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.137860] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[    0.138333] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.138731] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[    0.139167] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.139571] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[    0.140051] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.140461] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[    0.140987] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.141368] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[    0.146593] /hdmi@fe0a0000: Fixed dependency cycle(s) with /hdmi-con
[    0.146779] /hdmi-con: Fixed dependency cycle(s) with /hdmi@fe0a0000
[    0.161495] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.161520] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.161532] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.161539] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.161548] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.161555] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.161564] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.161571] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.172392] cryptd: max_cpu_qlen set to 1000
[    0.230423] raid6: neonx8   gen()  1462 MB/s
[    0.287269] raid6: neonx4   gen()  1434 MB/s
[    0.344105] raid6: neonx2   gen()  1334 MB/s
[    0.400976] raid6: neonx1   gen()  1088 MB/s
[    0.457788] raid6: int64x8  gen()   741 MB/s
[    0.514649] raid6: int64x4  gen()  1006 MB/s
[    0.571488] raid6: int64x2  gen()   947 MB/s
[    0.628401] raid6: int64x1  gen()   624 MB/s
[    0.628413] raid6: using algorithm neonx8 gen() 1462 MB/s
[    0.685141] raid6: .... xor() 1144 MB/s, rmw enabled
[    0.685154] raid6: using neon recovery algorithm
[    0.685579] ACPI: Interpreter disabled.
[    0.687598] iommu: Default domain type: Translated
[    0.687620] iommu: DMA domain TLB invalidation policy: strict mode
[    0.688863] SCSI subsystem initialized
[    0.689161] libata version 3.00 loaded.
[    0.689557] usbcore: registered new interface driver usbfs
[    0.689624] usbcore: registered new interface driver hub
[    0.689681] usbcore: registered new device driver usb
[    0.690576] mc: Linux media interface: v0.10
[    0.690660] videodev: Linux video capture interface: v2.00
[    0.690817] pps_core: LinuxPPS API ver. 1 registered
[    0.690830] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.690876] PTP clock support registered
[    0.690945] EDAC MC: Ver: 3.0.0
[    0.691471] scmi_core: SCMI protocol bus registered
[    0.692194] Advanced Linux Sound Architecture Driver Initialized.
[    0.693724] vgaarb: loaded
[    0.694386] clocksource: Switched to clocksource arch_sys_counter
[    0.695368] VFS: Disk quotas dquot_6.6.0
[    0.695414] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.696357] pnp: PnP ACPI: disabled
[    0.711813] NET: Registered PF_INET protocol family
[    0.712323] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.801996] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.802099] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.802196] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.802725] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.804871] TCP: Hash tables configured (established 65536 bind 65536)
[    0.805620] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)
[    0.805988] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.806157] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.806728] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.806796] NET: Registered PF_XDP protocol family
[    0.806821] PCI: CLS 0 bytes, default 64
[    0.806869] ARM FF-A: FFA_VERSION returned not supported
[    0.807220] Trying to unpack rootfs image as initramfs...
[    0.813079] kvm [1]: nv: 554 coarse grained trap handlers
[    0.813708] kvm [1]: IPA Size Limit: 40 bits
[    0.813751] kvm [1]: GICv3: no GICV resource entry
[    0.813761] kvm [1]: disabling GICv2 emulation
[    0.813804] kvm [1]: GIC system register CPU interface enabled
[    0.813847] kvm [1]: vgic interrupt IRQ9
[    0.813902] kvm [1]: VHE mode initialized successfully
[    0.951696] Initialise system trusted keyrings
[    0.952102] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    0.952214] zbud: loaded
[    0.956377] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.958560] fuse: init (API version 7.41)
[    0.959825] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    1.045588] NET: Registered PF_ALG protocol family
[    1.045687] xor: measuring software checksum speed
[    1.047489]    8regs           :  1831 MB/sec
[    1.049309]    32regs          :  1817 MB/sec
[    1.051242]    arm64_neon      :  1709 MB/sec
[    1.051253] xor: using function: 8regs (1831 MB/sec)
[    1.051271] Key type asymmetric registered
[    1.051281] Asymmetric key parser 'x509' registered
[    1.051654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
[    1.052040] io scheduler mq-deadline registered
[    1.052054] io scheduler kyber registered
[    1.052305] io scheduler bfq registered
[    6.270412] Freeing initrd memory: 12736K
[    6.277882] ledtrig-cpu: registered to indicate activity on CPUs
[    6.293920] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[    6.293950] dma-pl330 fe530000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    6.297363] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[    6.297385] dma-pl330 fe550000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    6.304243] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    6.308434] printk: legacy console [ttyS2] disabled
[    6.309009] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 25, base_baud = 1500000) is a 16550A
[    6.309279] printk: legacy console [ttyS2] enabled
[    6.311316] Serial: AMBA driver
[    6.324899] brd: module loaded
[    6.432264] loop: module loaded
[    6.445335] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
[    6.445368] rk_gmac-dwmac fe010000.ethernet: IRQ sfty not found
[    6.445679] rk_gmac-dwmac fe010000.ethernet: supply phy not found, using dummy regulator
[    6.445879] rk_gmac-dwmac fe010000.ethernet: clock input or output? (output).
[    6.445898] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4e).
[    6.445911] rk_gmac-dwmac fe010000.ethernet: RX delay(0xb).
[    6.445931] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[    6.451000] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[    6.451413] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    6.451437] rk_gmac-dwmac fe010000.ethernet: 	DWMAC4/5
[    6.451451] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[    6.451462] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[    6.451471] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[    6.451481] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[    6.451490] rk_gmac-dwmac fe010000.ethernet: TSO supported
[    6.451500] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.451513] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
[    6.451526] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[    6.451537] rk_gmac-dwmac fe010000.ethernet: Using 32/32 bits DMA host/device width
[    6.604356] usbcore: registered new interface driver cdc_wdm
[    6.604770] usbcore: registered new interface driver uas
[    6.604857] usbcore: registered new interface driver usb-storage
[    6.605052] usbcore: registered new interface driver usbserial_generic
[    6.605121] usbserial: USB Serial support registered for generic
[    6.605183] usbcore: registered new interface driver ch341
[    6.605229] usbserial: USB Serial support registered for ch341-uart
[    6.605286] usbcore: registered new interface driver cp210x
[    6.605329] usbserial: USB Serial support registered for cp210x
[    6.605408] usbcore: registered new interface driver ftdi_sio
[    6.605456] usbserial: USB Serial support registered for FTDI USB Serial Device
[    6.605537] usbcore: registered new interface driver pl2303
[    6.605585] usbserial: USB Serial support registered for pl2303
[    6.605649] usbcore: registered new device driver onboard-usb-dev
[    6.609554] i2c_dev: i2c /dev entries driver
[    6.627994] sdhci: Secure Digital Host Controller Interface driver
[    6.628018] sdhci: Copyright(c) Pierre Ossman
[    6.628486] Synopsys Designware Multimedia Card Interface Driver
[    6.630146] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.634850] arm-scmi arm-scmi.0.auto: Using scmi_smc_transport
[    6.634883] arm-scmi arm-scmi.0.auto: SCMI max-rx-timeout: 30ms
[    6.635156] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
[    6.635625] arm-scmi arm-scmi.0.auto: SCMI Notifications - Core Enabled.
[    6.663673] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[    6.695721] ------------[ cut here ]------------
[    6.695737] WARNING: CPU: 2 PID: 1 at drivers/firmware/arm_scmi/shmem.c:63 shmem_tx_prepare+0x12c/0x150
[    6.695772] Modules linked in:
[    6.695790] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.63-ophub #1
[    6.695807] Hardware name: LZ-K3568 (DT)
[    6.695817] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.695831] pc : shmem_tx_prepare+0x12c/0x150
[    6.695847] lr : shmem_tx_prepare+0x11c/0x150
[    6.695862] sp : ffff80008003b8c0
[    6.695870] x29: ffff80008003b8c0 x28: ffff00010684bc10 x27: 0000000000000010
[    6.695896] x26: ffff8000816568d8 x25: ffff0001064ec080 x24: ffff00010684c0c8
[    6.695919] x23: ffff00010684bc10 x22: ffff8000829ed004 x21: ffff000101db2680
[    6.695942] x20: ffff8000829ed000 x19: ffff0001064ec080 x18: fffffffffffc4ab8
[    6.695964] x17: 000000003ed30368 x16: 0000000000000000 x15: ffff80008003b6c8
[    6.695986] x14: ffff800082487d58 x13: 2e64656c62616e45 x12: 2065726f43202d20
[    6.696007] x11: ffff800082487d58 x10: 00000000000affa8 x9 : 0000000000000040
[    6.696029] x8 : ffff00010684e130 x7 : 0000000000000000 x6 : ffff00010260b6e8
[    6.696050] x5 : ffff00010260b6c0 x4 : 000000000000003c x3 : 00000000000078ca
[    6.696071] x2 : 0000000000000000 x1 : 0000000000000f8a x0 : 0000000000000000
[    6.696093] Call trace:
[    6.696101]  shmem_tx_prepare+0x12c/0x150
[    6.696118]  smc_send_message+0x44/0x148
[    6.696135]  do_xfer+0xc8/0x4c0
[    6.696147]  version_get+0x84/0xb8
[    6.696160]  scmi_base_protocol_init+0x50/0x4a0
[    6.696175]  scmi_get_protocol_instance+0x1e0/0x4e4
[    6.696187]  scmi_probe+0x7b0/0x9d0
[    6.696198]  platform_probe+0x68/0xd8
[    6.696215]  really_probe+0xc0/0x390
[    6.696227]  __driver_probe_device+0x7c/0x150
[    6.696241]  driver_probe_device+0x40/0x120
[    6.696254]  __driver_attach+0xc8/0x1dc
[    6.696266]  bus_for_each_dev+0x78/0xd8
[    6.696278]  driver_attach+0x24/0x34
[    6.696290]  bus_add_driver+0x110/0x230
[    6.696301]  driver_register+0x68/0x124
[    6.696315]  __platform_driver_register+0x20/0x2c
[    6.696330]  scmi_driver_init+0x5c/0x6c
[    6.696346]  do_one_initcall+0x44/0x2b8
[    6.696362]  kernel_init_freeable+0x258/0x2cc
[    6.696380]  kernel_init+0x24/0x138
[    6.696394]  ret_from_fork+0x10/0x20
[    6.696409] ---[ end trace 0000000000000000 ]---
[    6.696424] scmi_protocol scmi_dev.1: Timeout waiting for a free TX channel !
[    6.696696] arm-scmi arm-scmi.0.auto: error -EOPNOTSUPP: unable to communicate with SCMI
[    6.696717] arm-scmi arm-scmi.0.auto: probe with driver arm-scmi failed with error -95
[    6.697840] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    6.699363] hid: raw HID events driver (C) Jiri Kosina
[    6.699546] usbcore: registered new interface driver usbhid
[    6.699558] usbhid: USB HID core driver
[    6.705680] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
[    6.711954] NET: Registered PF_LLC protocol family
[    6.714523] Initializing XFRM netlink socket
[    6.715217] NET: Registered PF_INET6 protocol family
[    6.765355] mmc1: new HS200 MMC card at address 0001
[    6.766581] mmcblk1: mmc1:0001 SCA128 116 GiB
[    6.770935] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    6.770960] GPT:7225343 != 244252671
[    6.770974] GPT:Alternate GPT header not at the end of the disk.
[    6.770981] GPT:7225343 != 244252671
[    6.770989] GPT: Use GNU Parted to correct GPT errors.
[    6.771027]  mmcblk1: p1 p2
[    6.772180] mmcblk1boot0: mmc1:0001 SCA128 4.00 MiB
[    6.773913] mmcblk1boot1: mmc1:0001 SCA128 4.00 MiB
[    6.775613] mmcblk1rpmb: mmc1:0001 SCA128 4.00 MiB, chardev (237:0)
[    6.781965] Segment Routing with IPv6
[    6.781990] RPL Segment Routing with IPv6
[    6.782084] In-situ OAM (IOAM) with IPv6
[    6.782290] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    6.783815] NET: Registered PF_PACKET protocol family
[    6.783845] NET: Registered PF_KEY protocol family
[    6.783895] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    6.806463] registered taskstats version 1
[    6.807112] Loading compiled-in X.509 certificates
[    6.836001] zswap: loaded using pool zstd/zbud
[    6.836675] Key type .fscrypt registered
[    6.836690] Key type fscrypt-provisioning registered
[    6.840564] Btrfs loaded, zoned=no, fsverity=no
[    6.850040] alg: No test for 842 (842-scomp)
[    6.850235] alg: No test for 842 (842-generic)
[    6.923129] "cryptomgr_test" (194) uses obsolete ecb(arc4) skcipher
[    6.927064] alg: aead: aegis128-simd encryption test failed (wrong result) on test vector 0, cfg="in-place (one sglist)"
[    6.927106] alg: self-tests for aegis128 using aegis128-simd failed (rc=-22)
[    6.927118] ------------[ cut here ]------------
[    6.927127] alg: self-tests for aegis128 using aegis128-simd failed (rc=-22)
[    6.927184] WARNING: CPU: 3 PID: 206 at crypto/testmgr.c:5928 alg_test+0x5a4/0x5c0
[    6.927219] Modules linked in:
[    6.927239] CPU: 3 UID: 0 PID: 206 Comm: cryptomgr_test Tainted: G        W          6.12.63-ophub #1
[    6.927257] Tainted: [W]=WARN
[    6.927265] Hardware name: LZ-K3568 (DT)
[    6.927274] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.927288] pc : alg_test+0x5a4/0x5c0
[    6.927304] lr : alg_test+0x5a4/0x5c0
[    6.927318] sp : ffff800085053d50
[    6.927325] x29: ffff800085053df0 x28: 0000000000000003 x27: 0000000000000005
[    6.927349] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff8000828c31f0
[    6.927371] x23: ffff000106722680 x22: 0000000000000003 x21: ffff000106722600
[    6.927393] x20: 00000000ffffffea x19: ffff800081478708 x18: 000000000000000a
[    6.927416] x17: 6f2029746c757365 x16: 0000000000000000 x15: 0000000000000000
[    6.927438] x14: ffff800082487d58 x13: 0000000000000001 x12: ffff80008285b42d
[    6.927462] x11: ffff800082487d58 x10: 00000000000affa8 x9 : 0000000000000170
[    6.927484] x8 : ffff800082537d58 x7 : 0000000000000058 x6 : ffff800082537d58
[    6.927507] x5 : 00000000ffffe16f x4 : 000000000000016f x3 : 0000000000000000
[    6.927530] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001010ed8c0
[    6.927553] Call trace:
[    6.927561]  alg_test+0x5a4/0x5c0
[    6.927579]  cryptomgr_test+0x24/0x44
[    6.927594]  kthread+0x110/0x120
[    6.927610]  ret_from_fork+0x10/0x20
[    6.927628] ---[ end trace 0000000000000000 ]---
[    7.072606] fan53555-regulator 0-001c: error -ENXIO: Failed to get chip ID!
[    7.202120] vdda0v9_image: Bringing 600000uV into 900000-900000uV
[    7.232051] vcca1v8_image: Bringing 600000uV into 1800000-1800000uV
[    7.246517] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey.3.auto/input/input0
[    7.252726] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[    7.252817] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[    7.252835] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[    7.252896] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 67,32 bit host data width,256 deep fifo
[    7.253956] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
[    7.268036] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    7.274232] ehci-platform fd800000.usb: EHCI Host Controller
[    7.274680] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[    7.274912] ehci-platform fd800000.usb: irq 68, io mem 0xfd800000
[    7.275387] ehci-platform fd880000.usb: EHCI Host Controller
[    7.275746] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[    7.275908] ehci-platform fd880000.usb: irq 69, io mem 0xfd880000
[    7.284464] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[    7.284972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    7.284997] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.285011] usb usb1: Product: EHCI Host Controller
[    7.285021] usb usb1: Manufacturer: Linux 6.12.63-ophub ehci_hcd
[    7.285032] usb usb1: SerialNumber: fd800000.usb
[    7.285905] hub 1-0:1.0: USB hub found
[    7.285968] hub 1-0:1.0: 1 port detected
[    7.295326] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[    7.298424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    7.298458] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.298471] usb usb2: Product: EHCI Host Controller
[    7.298482] usb usb2: Manufacturer: Linux 6.12.63-ophub ehci_hcd
[    7.298493] usb usb2: SerialNumber: fd880000.usb
[    7.299342] hub 2-0:1.0: USB hub found
[    7.299407] hub 2-0:1.0: 1 port detected
[    7.330936] clk: Disabling unused clocks
[    7.333120] PM: genpd: Disabling unused power domains
[    7.333309] ALSA device list:
[    7.333330]   No soundcards found.
[    7.334748] Freeing unused kernel memory: 2560K
[    7.334986] Run /init as init process
[    7.334998]   with arguments:
[    7.335008]     /init
[    7.335017]   with environment:
[    7.335024]     HOME=/
[    7.335031]     TERM=linux
[    7.335039]     splash=verbose
[    7.335047]     ubootpart=9b1455a5-c584-4a3e-9b05-9cc06fa88762
[    7.335055]     cgroup_enable=memory
[    7.335064]     cgroup_memory=1
[    7.534466] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    7.681857] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[    7.681893] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.681907] usb 1-1: Product: USB 2.0 Hub [MTT]
[    7.682949] hub 1-1:1.0: USB hub found
[    7.683116] hub 1-1:1.0: 7 ports detected
[    8.885031] ohci-platform fd840000.usb: Generic Platform OHCI controller
[    8.885792] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[    8.886264] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
[    8.886427] ohci-platform fd8c0000.usb: irq 72, io mem 0xfd8c0000
[    8.886509] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[    8.886651] ohci-platform fd840000.usb: irq 71, io mem 0xfd840000
[    8.947999] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    8.948038] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.948052] usb usb3: Product: Generic Platform OHCI controller
[    8.948062] usb usb3: Manufacturer: Linux 6.12.63-ophub ohci_hcd
[    8.948073] usb usb3: SerialNumber: fd840000.usb
[    8.949187] hub 3-0:1.0: USB hub found
[    8.949279] hub 3-0:1.0: 1 port detected
[    8.951661] rk808-rtc rk808-rtc.4.auto: registered as rtc0
[    8.955104] rk808-rtc rk808-rtc.4.auto: setting system clock to 2017-08-05T09:00:16 UTC (1501923616)
[    8.964231] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    8.964267] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.964281] usb usb4: Product: Generic Platform OHCI controller
[    8.964292] usb usb4: Manufacturer: Linux 6.12.63-ophub ohci_hcd
[    8.964302] usb usb4: SerialNumber: fd8c0000.usb
[    8.970456] hub 4-0:1.0: USB hub found
[    8.970550] hub 4-0:1.0: 1 port detected
[    9.052536] rockchip-vop2 fe040000.vop: Adding to iommu group 0
[    9.070644] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops [rockchipdrm])
[    9.084884] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    9.091919] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[    9.093814] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[    9.105265] [drm] Initialized rockchip 1.0.0 for display-subsystem on minor 0
[    9.105853] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    9.106061] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    9.112285] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    9.112744] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 5
[    9.112955] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000808002000010
[    9.113040] xhci-hcd xhci-hcd.11.auto: irq 75, io mem 0xfd000000
[    9.113360] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    9.113906] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 6
[    9.113953] xhci-hcd xhci-hcd.11.auto: Host supports USB 3.0 SuperSpeed
[    9.114240] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    9.114264] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.114278] usb usb5: Product: xHCI Host Controller
[    9.114289] usb usb5: Manufacturer: Linux 6.12.63-ophub xhci-hcd
[    9.114299] usb usb5: SerialNumber: xhci-hcd.11.auto
[    9.115435] hub 5-0:1.0: USB hub found
[    9.115531] hub 5-0:1.0: 1 port detected
[    9.116234] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    9.116515] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    9.116540] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.116554] usb usb6: Product: xHCI Host Controller
[    9.116564] usb usb6: Manufacturer: Linux 6.12.63-ophub xhci-hcd
[    9.116574] usb usb6: SerialNumber: xhci-hcd.11.auto
[    9.118777] hub 6-0:1.0: USB hub found
[    9.118871] hub 6-0:1.0: 1 port detected
[    9.122087] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found
[    9.122122] rk_gmac-dwmac fe2a0000.ethernet: IRQ sfty not found
[    9.123009] rk_gmac-dwmac fe2a0000.ethernet: supply phy not found, using dummy regulator
[    9.123349] rk_gmac-dwmac fe2a0000.ethernet: Can not read property: clock_in_out.
[    9.123375] rk_gmac-dwmac fe2a0000.ethernet: Can not read property: tx_delay.
[    9.123386] rk_gmac-dwmac fe2a0000.ethernet: set tx_delay to 0x30
[    9.123399] rk_gmac-dwmac fe2a0000.ethernet: Can not read property: rx_delay.
[    9.123408] rk_gmac-dwmac fe2a0000.ethernet: set rx_delay to 0x10
[    9.123840] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
[    9.123925] rk_gmac-dwmac fe2a0000.ethernet: clock input from PHY
[    9.123939] rk_gmac-dwmac fe2a0000.ethernet: unsupported interface 4
[    9.128967] rk_gmac-dwmac fe2a0000.ethernet: init for SGMII
[    9.181596] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    9.181670] rk_gmac-dwmac fe2a0000.ethernet: 	DWMAC4/5
[    9.181687] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
[    9.181699] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
[    9.181709] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
[    9.181718] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
[    9.181727] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
[    9.181737] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    9.181750] rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=10)
[    9.181765] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
[    9.181776] rk_gmac-dwmac fe2a0000.ethernet: Using 32/32 bits DMA host/device width
[    9.508771] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[    9.509207] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 7
[    9.509451] xhci-hcd xhci-hcd.12.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000808002000010
[    9.509540] xhci-hcd xhci-hcd.12.auto: irq 78, io mem 0xfcc00000
[    9.509828] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[    9.510199] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 8
[    9.510232] xhci-hcd xhci-hcd.12.auto: Host supports USB 3.0 SuperSpeed
[    9.510494] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    9.510515] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.510528] usb usb7: Product: xHCI Host Controller
[    9.510539] usb usb7: Manufacturer: Linux 6.12.63-ophub xhci-hcd
[    9.510549] usb usb7: SerialNumber: xhci-hcd.12.auto
[    9.511408] hub 7-0:1.0: USB hub found
[    9.511477] hub 7-0:1.0: 1 port detected
[    9.512152] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    9.512341] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    9.512362] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.512375] usb usb8: Product: xHCI Host Controller
[    9.512385] usb usb8: Manufacturer: Linux 6.12.63-ophub xhci-hcd
[    9.512396] usb usb8: SerialNumber: xhci-hcd.12.auto
[    9.513225] hub 8-0:1.0: USB hub found
[    9.513288] hub 8-0:1.0: 1 port detected
[    9.612325] Registered IR keymap rc-cec
[    9.612605] rc rc0: dw_hdmi as /devices/platform/fe0a0000.hdmi/rc/rc0
[    9.612906] input: dw_hdmi as /devices/platform/fe0a0000.hdmi/rc/rc0/input1
[    9.721639] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[    9.986505] EXT4-fs (mmcblk1p2): mounted filesystem c5d5905c-3fcf-4a75-8e8a-bb283edcb8b6 r/w with ordered data mode. Quota mode: none.
[   10.446893] systemd[1]: System time advanced to built-in epoch: Thu 2025-09-04 02:38:20 CST
[   10.526200] systemd[1]: systemd 257.9-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[   10.526263] systemd[1]: Detected architecture arm64.
[   10.534038] systemd[1]: Hostname set to <armbian>.
[   10.537119] systemd[1]: Initializing machine ID from random generator.
[   11.056968] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
[   11.973414] systemd[1]: Queued start job for default target graphical.target.
[   12.038722] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[   12.043131] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[   12.047015] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[   12.049782] systemd[1]: Created slice user.slice - User and Session Slice.
[   12.050524] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[   12.052085] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[   12.052438] systemd[1]: Expecting device dev-disk-by\x2duuid-81dfe459\x2da8c6\x2d48b9\x2d918c\x2d72f9ae03c65a.device - /dev/disk/by-uuid/81dfe459-a8c6-48b9-918c-72f9ae03c65a...
[   12.052646] systemd[1]: Expecting device dev-ttyAML0.device - /dev/ttyAML0...
[   12.052889] systemd[1]: Expecting device dev-ttyS2.device - /dev/ttyS2...
[   12.053521] systemd[1]: Reached target slices.target - Slice Units.
[   12.053874] systemd[1]: Reached target swap.target - Swaps.
[   12.082080] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[   12.083424] systemd[1]: Listening on syslog.socket - Syslog Socket.
[   12.090161] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[   12.091277] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   12.092242] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   12.093377] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[   12.093838] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   12.094026] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   12.094910] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   12.095690] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   12.102987] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[   12.109819] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   12.117619] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[   12.128395] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   12.145987] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   12.147414] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[   12.164239] systemd[1]: Starting fake-hwclock-load.service - Restore the current clock...
[   12.202133] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[   12.218793] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   12.238770] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[   12.251435] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[   12.265413] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   12.291311] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[   12.293038] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[   12.319186] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   12.320245] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   12.320888] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   12.336769] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[   12.389492] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   12.426347] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[   12.428582] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   12.430580] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[   12.433181] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   12.435338] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   12.438710] systemd[1]: fake-hwclock-load.service: Deactivated successfully.
[   12.445305] systemd[1]: Finished fake-hwclock-load.service - Restore the current clock.
[   12.448931] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   12.452936] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   12.454988] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[   12.459203] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   12.460786] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[   12.468462] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   12.470146] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   12.474085] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   12.477534] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[   12.495118] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   12.515577] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   12.516410] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   12.548640] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   12.565910] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[   12.573467] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[   12.581920] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[   12.635561] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[   12.659448] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[   12.680098] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[   12.711836] EXT4-fs (mmcblk1p2): re-mounted c5d5905c-3fcf-4a75-8e8a-bb283edcb8b6.
[   12.732085] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[   12.737282] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because no trigger condition checks were met.
[   12.738049] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[   12.751666] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[   12.752044] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   12.817141] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[   12.824850] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[   12.862649] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[   12.871429] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[   13.008837] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[   13.021368] systemd[1]: Starting systemd-resolved.service - Network Name Resolution...
[   13.032109] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[   13.168230] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[   13.169845] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[   13.181902] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[   13.438132] systemd[1]: Mounting tmp.mount - /tmp...
[   13.577786] systemd[1]: Mounted tmp.mount - /tmp.
[   13.821270] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
[   14.179899] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[   14.196799] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen...
[   14.485795] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen.
[   14.493053] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[   14.493868] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch.
[   14.494299] systemd[1]: Reached target paths.target - Path Units.
[   15.301426] systemd[1]: Found device dev-disk-by\x2duuid-81dfe459\x2da8c6\x2d48b9\x2d918c\x2d72f9ae03c65a.device - /dev/disk/by-uuid/81dfe459-a8c6-48b9-918c-72f9ae03c65a.
[   15.325302] systemd[1]: Starting systemd-fsck@dev-disk-by\x2duuid-81dfe459\x2da8c6\x2d48b9\x2d918c\x2d72f9ae03c65a.service - File System Check on /dev/disk/by-uuid/81dfe459-a8c6-48b9-918c-72f9ae03c65a...
[   15.521112] random: crng init done
[   15.541488] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[   15.555656] systemd[1]: Found device dev-ttyS2.device - /dev/ttyS2.
[   15.557222] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[   15.612417] systemd[1]: Finished systemd-fsck@dev-disk-by\x2duuid-81dfe459\x2da8c6\x2d48b9\x2d918c\x2d72f9ae03c65a.service - File System Check on /dev/disk/by-uuid/81dfe459-a8c6-48b9-918c-72f9ae03c65a.
[   15.617531] systemd[1]: boot.mount: Directory /boot to mount over is not empty, mounting anyway.
[   15.628336] systemd[1]: Mounting boot.mount - /boot...
[   15.729409] systemd[1]: Started systemd-resolved.service - Network Name Resolution.
[   15.730244] systemd[1]: Reached target nss-lookup.target - Host and Network Name Lookups.
[   15.739075] EXT4-fs (mmcblk1p1): mounted filesystem 81dfe459-a8c6-48b9-918c-72f9ae03c65a r/w with ordered data mode. Quota mode: none.
[   15.749248] systemd[1]: Mounted boot.mount - /boot.
[   15.750374] systemd[1]: Reached target local-fs.target - Local File Systems.
[   15.761354] systemd[1]: Listening on systemd-sysext.socket - System Extension Image Management.
[   15.770541] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config...
[   15.779635] systemd[1]: Starting console-setup.service - Set console font and keymap...
[   15.792122] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data...
[   15.808631] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
[   15.810512] systemd[1]: systemd-machine-id-commit.service - Save Transient machine-id to Disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
[   15.891460] systemd[1]: Received SIGRTMIN+20 from PID 308 (plymouthd).
[   15.902141] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data.
[   15.943234] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 459 (systemd-binfmt)
[   15.955010] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
[   16.090957] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
[   16.100233] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
[   16.182885] zram: Added device: zram0
[   16.183876] zram: Added device: zram1
[   16.186369] zram: Added device: zram2
[   16.331867] zram0: detected capacity change from 0 to 7878560
[   16.381882] Adding 3939276k swap on /dev/zram0.  Priority:5 extents:1 across:3939276k SS
[   16.467470] zram1: detected capacity change from 0 to 102400
[   16.548834] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config.
[   16.565212] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging...
[   16.765394] rockchip-rga fdeb0000.rga: HW Version: 0x03.02
[   16.765976] rockchip-rga fdeb0000.rga: Registered rockchip-rga as /dev/video0
[   16.793569] panfrost fde60000.gpu: get clock failed -517
[   16.793608] panfrost fde60000.gpu: clk init failed -517
[   16.814309] EXT4-fs (zram1): mounted filesystem 7c134452-8892-4332-9fc0-b5760cd2343b r/w without journal. Quota mode: none.
[   16.943905] panfrost fde60000.gpu: get clock failed -517
[   16.943942] panfrost fde60000.gpu: clk init failed -517
[   16.979380] panfrost fde60000.gpu: get clock failed -517
[   16.979416] panfrost fde60000.gpu: clk init failed -517
[   17.005761] panfrost fde60000.gpu: get clock failed -517
[   17.005796] panfrost fde60000.gpu: clk init failed -517
[   17.421388] panfrost fde60000.gpu: get clock failed -517
[   17.421424] panfrost fde60000.gpu: clk init failed -517
[   17.645961] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging.
[   17.666002] systemd[1]: Starting systemd-journald.service - Journal Service...
[   18.052148] systemd-journald[590]: Collecting audit messages is disabled.
[   18.565231] systemd[1]: Started systemd-journald.service - Journal Service.
[   18.801819] systemd-journald[590]: Received client request to flush runtime journal.
[   19.534252] RPC: Registered named UNIX socket transport module.
[   19.534283] RPC: Registered udp transport module.
[   19.534291] RPC: Registered tcp transport module.
[   19.534298] RPC: Registered tcp-with-tls transport module.
[   19.534305] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.643964] systemd-journald[590]: Received client request to relinquish /var/log/journal/cfa47931372340549a5d46fc22235a52 access.
[   27.439195] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   27.443079] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-1:00] driver [YT8511 Gigabit Ethernet] (irq=POLL)
[   27.451127] dwmac4: Master AXI performs any burst length
[   27.451184] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found
[   27.451228] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   27.451751] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
[   27.453347] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode
[   27.497876] rk_gmac-dwmac fe2a0000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   27.504314] rk_gmac-dwmac fe2a0000.ethernet eth1: PHY [stmmac-0:00] driver [YT8521 Gigabit Ethernet] (irq=POLL)
[   27.504441] dwmac4: Master AXI performs any burst length
[   27.504476] rk_gmac-dwmac fe2a0000.ethernet eth1: No Safety Features support found
[   27.504515] rk_gmac-dwmac fe2a0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   27.505690] rk_gmac-dwmac fe2a0000.ethernet eth1: registered PTP clock
[   27.506571] rk_gmac-dwmac fe2a0000.ethernet eth1: configuring for phy/sgmii link mode
[   27.595504] panfrost fde60000.gpu: get clock failed -517
[   27.595539] panfrost fde60000.gpu: clk init failed -517
[   27.595739] platform cpufreq-dt: deferred probe pending: (reason unknown)
[   27.595760] platform rk809-sound: deferred probe pending: asoc-simple-card: parse error
[   27.595772] platform fde60000.gpu: deferred probe pending: (reason unknown)
[   27.595792] rockchip-pm-domain fdd90000.power-management:power-controller: sync_state() pending due to fde60000.gpu
[   27.595805] rockchip-pm-domain fdd90000.power-management:power-controller: sync_state() pending due to fdea0000.video-codec
[   27.595830] rockchip-pm-domain fdd90000.power-management:power-controller: sync_state() pending due to fdee0000.video-codec
[   32.301961] EXT4-fs (mmcblk1p2): resizing filesystem from 767744 to 30396411 blocks
[   32.959717] EXT4-fs (mmcblk1p2): resized filesystem to 30396411
[  184.568683] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[  214.971745] YT8521 Gigabit Ethernet stmmac-0:00: yt8521_read_status, link down, media: UTP
[  214.971810] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Down
[  217.960776] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  498.651307] rk_gmac-dwmac fe010000.ethernet eth0: Link is Down
[  501.744997] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[  551.397945] YT8521 Gigabit Ethernet stmmac-0:00: yt8521_read_status, link down, media: UTP
[  551.398010] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Down
[  554.438244] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[  799.669046] YT8521 Gigabit Ethernet stmmac-0:00: yt8521_read_status, link down, media: UTP
[  799.669114] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Down
[  802.657912] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

[zzhccv1234]

dmesg 已上传

dtb指向错误，armbianenv.txt文件下dtb指向错误
verbosity=1
bootlogo=false
fdtfile=rockchip/rk3568-lz-k3568
rootdev=UUID=c5d5905c-3fcf-4a75-8e8a-bb283edcb8b6
rootfstype=ext4
rootflags=rw,errors=remount-ro
overlay_prefix=rk3568
overlays=
extraargs=rw rootwait
extraboardargs=net.ifnames=0 max_loop=128
docker_optimizations=on

eth1网卡不能用eth0正常 sata不识别 希望能修复，谢谢

[ophub]

下载，解压成 .dtb 后上传到 Armbian 系统 /boot/dtb/rockchip/ 目录下覆盖同名文件，然后保存重启（sync && reboot）。

rk3568-lz-k3568.dtb.zip

# 看日志系统识别了 eth1 控制器（fe2a0000.ethernet），PHY 芯片被识别为 YT8521 Gigabit Ethernet，使用 SGMII 接口模式。
[9.128967] rk_gmac-dwmac fe2a0000.ethernet: init for SGMII
[27.504314] ... PHY [stmmac-0:00] driver [YT8521 Gigabit Ethernet]

# SCMI 报错影响，日志中出现了严重的电源管理/时钟报错
[6.696424] scmi_protocol scmi_dev.1: Timeout waiting for a free TX channel !

# SATA 子系统已加载： 内核加载了基础驱动 libata，说明内核是支持 SATA 的。
[0.689161] libata version 3.00 loaded.

# USB 3.0 控制器占用了通道： 日志中出现了两个 xHCI (USB 3.0) 主机控制器：
[9.112285] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[9.508771] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller

# 解决 SATA 的方法：
# RK3568 芯片拥有 3 个 "Combo PIPE PHY" 物理通道，这些通道是复用的。
# 同一个物理通道可以配置为 USB 3.0，也可以配置为 SATA，或者 PCIe，但不能同时使用。
# 所以我禁用了 USB 3.0 控制器（USB 2.0 功能正常），并启用 SATA 控制器。

# 解决网口的方法：
# 针对 eth1 (SGMII) 不稳定的问题，我使用 tx_delay 和 rx_delay 来调整 MAC 内部逻辑。
# 这 2 个值我是从其他 dts 里看到的，理论上也适合你的板子。

以后长文日志发日志查看里，把日志网址发到这里，或者发 dmesg.txt 类的文本文件，或者学我上面那样使用 Makedown 的日志折叠方法贴日志，不要原文贴那么长，手机划拉半天也看不清日志。
免费日志： https://paste.armbian.com/

[zzhccv1234]

https://paste.armbian.com/conelutedi.yaml

sata已经正常识别，网卡eth1依然能识别无法使用

root@armbian:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 46:66:c6:95:62:23 brd ff:ff:ff:ff:ff:ff
altname end1
altname enx4666c6956223
inet 192.168.8.199/24 brd 192.168.8.255 scope global dynamic noprefixroute eth0
valid_lft 1207sec preferred_lft 1207sec
inet6 fe80::ce8a:737e:9745:467f/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
4: ip6tnl0@NONE: mtu 1452 qdisc noop state DOWN group default qlen 1000
link/tunnel6 :: brd :: permaddr 4ec8:1850:1e70::
5: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 46:66:c6:95:62:22 brd ff:ff:ff:ff:ff:ff
altname end0
altname enx4666c6956222
inet6 fe80::af32:8118:7b84:4a11/64 scope link noprefixroute
valid_lft forever preferred_lft forever

[ophub]

你知道网卡芯片型号吗？日志显示识别的 YT8521 对不对？

或者你有可以正常使用的dtb吗？发一个给我，我反编译看一下是什么，什么操作系统的可以正常工作的dtb都可以。

[zzhccv1234]

https://drive.google.com/file/d/1KdQ9V9Bg0_gYEhJKRRXzxPg2-X6qffPF/view?usp=drive_link

这个armbian可以正常启动,双网卡正常，6.1.99内核。

eth0是yt8511c
eth1是yt85215c

下方提供了自带系统的dtb和上方6.1.99系统的dtb,在这两个系统下，两个网口都可以正常使用

k3568-dtb.zip

[ophub]

&gmac0 需要看一下这个节点的设置，你会反编译吗？仓库文档里有dtb反编译dts的命令介绍。

ophub/linux-6.12.y@ce17c44

这是刚才改的sata可以使用的版本。在这基础上改 &gmac0 里的值即可。可以试一下这个值：

tx_delay = <0x11>;
rx_delay = <0x11>;

[zzhccv1234]

我修改并用dtc工具编译后，验证，依然是eth0可用eth1不可用

fe2a0000.ethernet eth1
这个eth1节点不可用

fe010000.ethernet eth0
这个节点可用

[zzhccv1234]

之前长风和我说过，好像6.6内核和6.12内核会有一个网口起不来，所以匹配了6.1内核，我试试替换一个6.1内核看看起不起得来，或者辛苦下o大重新打包一个6.1内核的固件我重新测试。
刚刚发现，板载的mpcie也没法使用，不知道有没有开启的方法，谢谢赐教

[ophub]

https://github.com/ophub/kernel/actions

看上面的编译进度，大概 10 分钟就编译完成了。
6.x.y 的 3 个系列内核我都一起改了，你可以直接在线更新测试。
直接更新就是最新的内核，里面包含了最新修改的 dtb 文件。

armbian-update -k 6.1
armbian-update -k 6.6
armbian-update -k 6.12

也可以手动下载替换： https://github.com/ophub/kernel/releases/tag/kernel_stable