Request support for X96 Max Plus 100W

[trvqhuy]

I have the W522A radio module on my X96 Max Plus 100W board.

I found some information.
The W552a is an Fn-Link K255B-SR.
The Fn-Link K255B-SR is an Amlogic W155S1 chip, with the following datasheet:
https://usermanual.wiki/HUNAN-FN-LINK-TECHNOLOGY/K255B-SR.User-Manual-5353157.pdf

I found two github for the sources of this module:
https://github.com/CoreELEC/w1-aml
https://github.com/adeepn/w1-aml

Tutorials for W155S1
https://blog.csdn.net/zhaojy5453/article/details/115484201

I hope it can help you, thanks for your work.

[trvqhuy]

[ophub]

/boot/uEnv.txt
try meson-sm1-x96-air.dtb or meson-sm1-a95xf3-air.dtb
copy u-boot-x96maxplus.bin to u-boot.ext and u-boot.emmc

[trvqhuy]

Hi @ophub , I have tried 2 dtb files above, but none of them works.

I can install and boot normally but when I go to "Network" from "armbian-config" command, the screen always shown as the image below:

[ophub]

Which dtb are you using? The wired network is not available, and the IP is not obtained, right?

ifconfig
lsblk
cat /boot/uEnv.txt

[trvqhuy]

try meson-sm1-x96-air.dtb or meson-sm1-a95xf3-air.dtb

I've test these 2 files as you'd said.

The wired network works fine with available IP on both dtb files above, but cannot do the "Wifi" config

[trvqhuy]

Which dtb are you using? The wired network is not available, and the IP is not obtained, right?

ifconfig
lsblk
cat /boot/uEnv.txt

[ophub]

The user did not reply halfway through the last test of this box, and has not collected available configurations. You can add configurations after you test that the wired box can be used. For wireless, you need to check whether there is a driver, modify the dtb or add a new dtb.

Did you copy u-boot? Execute the following command screenshot:

ls /boot/u-boot*

[trvqhuy]

Yes I've copied the u-boot. Here is the screenshot:

[ophub]

Your wireless/bluetooth chip is W522A?

[trvqhuy]

Your wireless/bluetooth chip is W522A?

Yes sir, the radio module is W522A, with the following specifications:

• Name: X96 Max Plus 100W
• CPU: Amlogic S905X3 quad-core ARM Cortex A55
• GPU: ARM Mali-G31MP
• Radio module: W522A
• Memory: DDR3 4GB, FLASH 32GB
• Support 10/100M Ethernet, 2.4 and 5G WiFi, BT4.0;
• USB3.0 x 1, USB2.0 x 1, TF Card
• HDMI, AV, SPDIF

[trvqhuy]

My X96 Max Plus 100W and the 2101W have the same W522A radio module.

I hope I can help you with this link:
https://4pda.to/forum/index.php?showtopic=1013103&st=40#entry102780026

[ophub]

https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/CONTRIBUTORS.md

Thanks for your beta feedback, your contribution has been added to the list of contributors. x96-max+100W has been added to the device list, and the serial number of the installation option is 517

It's almost 12 o'clock in the middle of the night today, I have to go to bed, and I have to work tomorrow. I will look up the driver information of this wireless tomorrow and reply to you.
Do you have the original android firmware for this box? Share a download link, I will back it up so that other people can restore the system and use it.